Job parameters (PartMaker)

{addtl-note-name-01}

The name of Tool Note 1 from the Note Names dialog.

String

{addtl-note-name-02}

The name of Tool Note 2 from the Note Names dialog.

String

{addtl-note-name-03}

The name of Tool Note 3 from the Note Names dialog.

String

{addtl-note-name-04}

The name of Tool Note 4 from the Note Names dialog.

String

{addtl-note-name-05}

The name of Tool Note 5 from the Note Names dialog.

String

{addtl-note-name-06}

The name of Tool Note 6 from the Note Names dialog.

String

{addtl-note-name-07}

The name of Tool Note 7 from the Note Names dialog.

String

{addtl-note-name-08}

The name of Tool Note 8 from the Note Names dialog.

String

{collet-nose}

The length of a collet nose extension for the sub-spindle, as specified on the Spindle Settings dialog.

Only applicable to PartMaker/SwissCAM.

Numeric

{cut-off-sub-grip-z}

The sub-spindle grip position of the part as it is cut off and transferred to the sub-spindle, as specified by the Sub-Spindle Support Z Coordinate value on the Set Modes dialog.

Numeric

{face-note1}

The first line of Face Notes from the Setup dialog.

String

{face-note2}

The second line of Face Notes from the Setup dialog.

String

{face-note3}

The third line of Face Notes from the Setup dialog.

String

{job-file-name}

The name of the .JOB file.

String

{machine-id}

The Machine ID from the post processor.

String

{material-file-name}

The name of the Material file being used for the job.

String

{mch-file-name}

The name of the Machine file being used for the job.

String

{parameter-name-01}

Parameter Name 1 from the Optional Job Parameters dialog.

String

{parameter-name-02}

Parameter Name 2 from the Optional Job Parameters dialog.

String

{parameter-name-03}

Parameter Name 3 from the Optional Job Parameters dialog.

String

{parameter-name-04}

Parameter Name 4 from the Optional Job Parameters dialog.

String

{parameter-name-05}

Parameter Name 5 from the Optional Job Parameters dialog.

String

{parameter-name-06}

Parameter Name 6 from the Optional Job Parameters dialog.

String

{parameter-name-07}

Parameter Name 7 from the Optional Job Parameters dialog.

String

{parameter-name-08}

Parameter Name 8 from the Optional Job Parameters dialog.

String

{parameter-name-09}

Parameter Name 9 from the Optional Job Parameters dialog.

String

{parameter-name-10}

Parameter Name 10 from the Optional Job Parameters dialog.

String

{parameter-value-01}

Parameter Value 1 from the Optional Job Parameters dialog.

String

{parameter-value-02}

Parameter Value 2 from the Optional Job Parameters dialog.

String

{parameter-value-03}

Parameter Value 3 from the Optional Job Parameters dialog.

String

{parameter-value-04}

Parameter Value 4 from the Optional Job Parameters dialog.

String

{parameter-value-05}

Parameter Value 5 from the Optional Job Parameters dialog.

String

{parameter-value-06}

Parameter Value 6 from the Optional Job Parameters dialog.

String

{parameter-value-07}

Parameter Value 7 from the Optional Job Parameters dialog.

String

{parameter-value-08}

Parameter Value 8 from the Optional Job Parameters dialog.

String

{parameter-value-09}

Parameter Value 9 from the Optional Job Parameters dialog.

String

{parameter-value-10}

Parameter Value 10 from the Optional Job Parameters dialog.

String

{part-length}

The length of the part (Length) from the Setup dialog.

Numeric

{prog-num1}

The Program #1 specified on the Post Options dialog.

String

{prog-num2}

The Program #2 entered on the Post Options dialog.

String

{stock-id}

The Stock ID from the Setup dialog.

Numeric

{stock-od}

The Stock OD from the Setup dialog.

Numeric

{time-total}

The Total Time taken to cut the part from the Process Table.

Numeric

{time-units}

The time unit used for the Total Time shown on the Process Table.

String

{work-offset-main}

The Work Offset for the first Main Spindle Face window.

String

{work-offset-sub}

The Work Offset for the first Sub-Spindle Face window.

String

{work-shift}

The distance of the stock face from the chuck face (Work Shift) as specified on the Setup dialog..

Numeric