Manage QI measurements and results

Add measurements

The quality inspection may contain measurement results to fill in. To do this:

1. From the Quality Inspections workspace, open the QI you want to enter in measurements.
2. From the Measurements tab, click Edit.
3. Enter the measurement into the correct cell in the Actual column.
4. Click Save.

The difference between the Actual and Nominal values is automatically calculated and entered into the Deviation column. Depending on the tolerance set as shown in the Tol (+/-) column, the Flag updates to either Pass (green) or Fail (red). The steps to take next depend on your business processes and company standards.

Add results

1. From the Quality Inspections workspace, open the QI you want to enter in results.

2. From the Quality Inspection tab, click Edit.

3. In the Results section, optionally enter:

   1. Serial Number(s) – If the item being inspected has a serial number, enter it here.
   2. Batch/Lot(s) – If the item being inspected came from a specific batch or lot as indicated by the supplier, enter it here.
   3. Notes – Provide any additional notes regarding the QI and the results found.
   4. Image – Attach an image that shows any relevant results found.

4. Click Save.

Close the QI

Depending on the results that were found, this will determine the next steps that you’ll follow. Once the QI has been completed, it should be moved to a state of Closed.

1. From the Quality Inspections workspace, open the QI you want to close.
2. From the Status tab, click the Close transition.
3. (Optional) Enter a comment as to the reason for closing the QI and click Confirm.

The QI is now closed.