When a wire process is selected in the Process Table, the following settings are available on the Process Parameters dialog:
Info — This area displays information about the process you have selected:
- Process ID — This is the ID of the selected process.
- Operation — The name of the selected operation.
Power — Enter the power setting for the selected process.
Offset — Enter the distance between the wire and the part.
Feed — Enter the wire feed rate.
Options
- Cut Wire — Select this check box if the wire must be cut at the end of this process.
- Remove Slug — Select this check box if the operator must remove the slug piece at the end of this process.
Note — Enter any note you want to be associated with the process.
User Data — Click to display the User Data dialog, where you can specify custom data (known as User Data) for the current Post Configuration file.