The Surface Info – Cylinder dialog displays geometric information about the currently selected cylindrical face.
To display this dialog, double-click a cylindrical surface on a solid model.
The following settings are available:
Radius — Displays the radius of the selected cylindrical surface.
Height — Displays the height of the cylindrical surface.
C Angle — Displays the indexing angle required to machine this surface. PartMaker assumes that the Z axis of the Part Coordinate System is the Indexing Axis, except when using 4-axis rotary milling tables when PartMaker assumes that the X axis of the Part Coordinate System is the Indexing Axis.
B Angle — Displays the angle between the normal to the plane and Z axis of the Part Coordinate System after indexing the part through the C Angle. This angle is useful for machines with a B-axis.
Coordinate System — Select an option to specify whether you want to display the Center1 and Center2 coordinates using Part or Face coordinates.
Center X1, Center Y1, Center Z1 — These fields display the X, Y and Z coordinates of the center of one end of the cylindrical surface. By default, PartMaker chooses that end of the cylindrical surface that should be used as the point of tool entry, taking into consideration the orientation of the cylindrical surface and spindle type of the Face window.
Center X2, Center Y2, Center Z2 — These fields display the X, Y and Z coordinates of the center of the second end of the cylindrical surface.
Transfer Unwrapped Geometry — Click to transfer unwrapped edge geometry from the selected cylindrical surface to the current Face window. It also sets the stock diameter to the diameter of the selected surface. For milling, it also sets the stock length for the Face window. This button is available only for Mill Cylinder Face windows.
Transfer Holes and Slots — Click to transfer holes and slot edges from the selected cylindrical surface to the current Face window. It also sets the stock diameter to the diameter of the selected surface. For milling, it also sets the stock length for the Face window. This button is available only for Mill Diameter Index Face windows.
Project Outline — Click to project the peripheral edges of the selected surfaces onto the current PartMaker Face window. Any edge that is a curve is broken down into lines, based on the Curve Tolerance. PartMaker projects the outline in a direction perpendicular to the Face Plane of the current Face window.
If the geometry being transferred contains spline curves, PartMaker displays the Convert Curved Edges dialog where you can specify whether curves should be approximated into arcs or lines.