Mill End, Polar Setup dialog (PartMaker)

The following settings are available on the Setup dialog when creating, or editing, a Mill End, Polar Face window:

Table

Settings — Click to display the Table Settings dialog for the selected table type. You can use this dialog to select a different table type.

Table — This field displays the type of table you are using:

Note: Mill End, Polar is available only when using a Rotary 5 Axis or Vertical Rotary table with cylinder stock.

Stock

Stock — Select the type of stock you are using (Cylinder or Box). Mill End, Polar is available only for Cylinder stock.

Part ID

Part ID — Enter an ID for the part to which this Face window applies.

Note: Applicable only for Mill XY Planes using Standard or Tombstone tables.

Machining Function

Machining Function — Select the type of machining function you want to perform.

This topic describes the settings available for the Mill End, Polar machining function.

List of Face Windows

List of Face Windows — This area lists the Face windows that have been created for the current job. Select the Face window whose details you want to view, or edit, on this dialog.

Rename to — Enter a name for the currently selected Face window. If you do not enter a name, PartMaker uses Untitled as the name for the Face window.

Orientation

Length (L) — Enter the length of the finished stock.

Face Options — Click to display the Face Options dialog, where you can specify additional settings for the Face window.

Boundaries

Use the settings in this area of the dialog to set the stock boundaries:

OD — Enter the outside diameter of the stock.

ID — Enter the inside diameter of the stock. Enter 0 if the unmachined stock has no center hole.

Work Offset — If the postprocessor you are using supports work offset (or fixture) codes, enter the code that you want to use for the current Face window. PartMaker inserts this code into the NC programs for this job.

Multiple Stocks — Click to display the Multiple Stocks Machining dialog, where you can manage how PartMaker machines multiple stock.

Buttons

New — Click to add a new Face window to the List of Face Windows. The new Face window inherits the settings used for the previously selected Face window.

Duplicate — Click to display the Duplicate Face dialog, which enables you to create duplicate copies of the currently selected Face window. The new Faces are indexed at specified C-angle increments and contain all the geometry and workgroups from the original Face window.

Apply — Click to apply your changes to the currently selected Face window.

Delete — Click to delete the currently selected Face window from the List of Face Windows, so it is no longer available in the .job file.

User Data — Click to display the User Data dialog, where you can specify custom data (known as User Data) for the current Post Configuration file.

Notes

Notes — Enter any notes that are relevant to the current Face window or the job. Depending on the configuration of the postprocessor you are using, these notes can be included in the NC programs file for this job. Refer to the ConfigPost Reference Help for more information about configuring postprocessors.