Subassembly Reference for Autodesk Civil 3D PKT Subassemblies
Autodesk Civil 3D 2023 includes PKT subassemblies that were previously released in AutoCAD Civil 3D 2017 v1 Enhancements and the AutoCAD Civil 3D 2018.2 Update.
APWACurbs
The APWACurbs subassembly inserts links for a standard shape concrete kerb-and-channel with subbase. The kerb and channel dimensions are based on the APWA Standard Plans for Public Works Construction, 2012 edition.
BasicBench
The BasicBench subassembly inserts links to create cut or fill catch slopes with repeating benches as needed. You can define a swale width and depth at the benches. The last daylight slope to the target surface may be different than the bench slope.
BasicBenchTargetElevations
The BasicBenchTargetElevations subassembly inserts links to create cut or fill catch slopes with repeating benches as needed.
BasicBenchTargetOneLevel
The BasicBenchTargetOneLevel is a simple bench subassembly that inserts links to create cut or fill catch slopes with one bench.
BasicBenchWithOverExcavation
The BasicBenchWithOverExcavation subassembly inserts links to create cut or fill catch slopes with repeating benches as needed.
Benching
The Benching subassembly inserts links to create a benching. The benching may be created from the inside toe or inside top of the benching. The benching then daylights to a surface.
BioRetention
The BioRetention subassembly inserts links to create a bioretention area with three layers and an optional underdrain. The subassembly is based on requirements of the County of Los Angeles Low Impact Development Standards Manual, dated February 2014.
CaltransB3RetainingWall
The CaltransB3RetainingWall subassembly inserts links to create a retaining wall based on Caltrans Standard Plan B3-3 Retaining Wall.
CaltransKerbs
The CaltransCurbs subassembly inserts links to create kerbs and channels based on Caltrans Standard Plan RSP A87A.
ChannelDrain
The ChannelDrain subassembly inserts points and links to create a channel drain to collect water along a travelled way.
ClarkCountyBasicDaylight
The ClarkCountyBasicDaylight subassembly inserts links to create cut or fill catch slopes with a shoulder. You can define a ditch in cut situations.
ClarkCountyConcreteBarrierType2
The ClarkCountyConcreteBarrierType2 subassembly inserts links to represent a Clark County Type 2 concrete barrier.
ClarkCountyKerbE1
The ClarkCountyKerbE1 subassembly inserts links to create a kerb at the specified insertion point. The shape represents the Clark County Kerb, Type E1.
ClarkCountyExtrudedCurb
The ClarkCountyExtrudedCurb subassembly inserts links to create a Clark County Extruded Kerb.
ClarkCountyGuardrailType31
The ClarkCountyGuardrailType31 subassembly inserts links to create a Clark County Guardrail, Type 31, shape on the assembly.
ClarkCountyRainGardenNoKerb
The ClarkCountyRainGardenNoKerb subassembly inserts links to create a Clark County Rain Garden with no kerb.
ClarkCountyRainGardenV
The ClarkCountyRainGardenV subassembly inserts links to create a Clark County Rain Garden V, adjacent to the kerb.
ClarkCountyFootpath
The ClarkCountyFootpath subassembly inserts links for a concrete footpath with inside and outside grass boulevards based on the Clark County Footpath Standard. The footpath is over a CSBC layer.
ConditionalHorizontalTarget2
The ConditionalHorizontalTarget2 subassembly automatically applies various subassemblies, such as widening, kerb and channel, ditching or daylighting, to an assembly based on whether an offset target is found at the corridor chainage.
ConditionalMarkedPoint
The ConditionalMarkedPoint subassembly automatically applies various subassemblies, such as widening, kerb and channel, ditching or daylighting, to an assembly based on whether a marked point name is found at the corridor chainage.
CrossChannel
The CrossChannel subassembly inserts links to create cross channel placed at an intersection.
KerbAndChannelKerbRamp
The KerbAndChannelKerbRamp subassembly inserts links for a standard shape concrete kerb-and-channel with subbase that allows for adjustment of the kerb height by a profile to allow for the modelling of a kerb ramp. User-defined input parameters control the dimensions of the shape.
KerbEmbPipe
The KerbEmbPipe subassembly inserts links for a concrete kerb with embedded pipe at the invert level. A terrace may be placed behind the kerb and channel.
KerbOffsetPipe
The KerbOffsetPipe subassembly is used to place a kerb and channel with a pipe behind the kerb and channel. A terrace is also placed behind the kerb.
KerbWallRadius
The KerbWallRadius subassembly is used as a standard 6" (0.15 m) / 12" (0.30 m) kerb wall with user defined input for multiple widths and for the kerb radius.
Dam
The Dam subassembly inserts links to create a representation of a dam. A progress profile is present to adjust the dam geometry to reflect the progress.
DitchWithBenchingInFill
The DitchWithBenchingInFill subassembly places a ditch with predefined geometry and creates a benching in fill and cut conditions.
Driveway
The Driveway subassembly inserts links to create a driveway with a detached footpath. The driveway and kerb and channel is based on APWA Standard Plans for Public Works Construction, 2012 edition.
Dual_RailPlatform
The Dual_RailPlatform subassembly includes common layers for dual rail platforms such as walls, concrete plinth, footway, sand bed and foundation.
EvenSlopeDitch
The EvenSlopeDitch subassembly creates a ditch to add to either the left or the right sides of the assembly.
GabionWall
The GabionWall subassembly creates a Gabion Wall. The Gabion Wall is based on Caltrans Standard Plan D100A.
InfiltrationTrench
The InfiltrationTrench subassembly inserts links to create an infiltration trench. The subassembly is based on requirements of the County of Los Angeles Low Impact Development Standards Manual, dated February 2014.
Internal_Multi_Track
The Internal_Multi_Track subassembly is used for a single railroad that includes sleepers, ballast, subballast and two additional layers or materials which can be used for Sub Base and Soil Fill material.
LaneWithMarkedPoint
The LaneWithMarkedPoint subassembly creates a cross-sectional representation of a travel lane, with a way to connect a link from the attachment point to a previously named marked point.
Left_Hand_Multi_Track
The Left_Hand_Multi_Track subassembly is used for a single railroad that includes sleepers, ballast, subballast and two additional layers or materials which can be used for Sub Base and Soil Fill material.
MultipleBench_Depth
The MultipleBench_Depth subassembly creates cut or fill catch slopes with benches with varying bench slopes, swale widths and swale depths.
MultipleBenchWithPipes
The MultipleBenchWithPipes subassembly creates cut or fill catch slopes with repeating benches as needed.
ParkingAdjacentToRoad
The ParkingAdjacentToRoad subassembly builds a parking area adjacent to an existing carriageway. The parking includes a paved area of the existing carriageway, a channel and a parking pavement. The parking pavement ties into a proposed kerb level and top of kerb location.
PermeablePavement
The PermeablePavement subassembly inserts links and shapes to create permeable pavement pavers with an optional underdrain.
PipeTrenchAdjustDiameter
The PipeTrenchAdjustDiameter subassembly with a single pipe in a trench that allows volume calculation of bedding base and granular backfill.
PipeTrenchMultipleLayers
The PipeTrenchMultipleLayers subassembly has a single pipe in a trench and a layer of material encasing the pipe.
PipeTrenchMultipleLayers2
The PipeTrenchMultipleLayers2 subassembly has a single pipe in a trench, a layer of material encasing the pipe and an additional layer of material above the pipe encasement.
RailDoubleTrackCANT
The RailDoubleTrackCANT subassembly is used to insert the rails, ties, ballast, subballast, soil fill and subbase for a double-track railroad.
RailPlatform
The RailPlatform subassembly includes common layers for rail platforms such as walls, concrete plinth, footway, sand bed, foundation and so on.
RailSingleTrackCANT
The RailSingleTrackCANT subassembly is used to insert the rails, ties, ballast and subballast for a single-track railroad.
ReinforcedConcreteCribWall
The ReinforcedConcreteCribWall subassembly inserts links to create a Reinforced Concrete Crib Wall Based on Caltrans Standard Plan C7A.
Right_Hand_Multi_Track
The Right_Hand_Multi_Track subassembly is used for a single railroad that includes sleepers, ballast, subballast and two additional layers or materials which can be used for Sub Base and Soil Fill material.
RockRetainingWall
The RockRetainingWall subassembly inserts links to create a rock retaining wall to retain soil.
RolledKerb
The RolledCurb subassembly inserts links for a rolled kerb shape concrete kerb-and-channel with subbase.
ShoulderBacking
The ShoulderBacking subassembly inserts links and shapes to create a shape to represent shoulder backing.
ShoulderIntersectLeft
The ShoulderIntersectLeft subassembly creates a shoulder extended to a daylight point based on the shoulder slope and subgrade gradient. It only operates to the left.
ShoulderIntersectRight
The ShoulderIntersectRight subassembly creates a shoulder extended to a daylight point based on the shoulder slope and subgrade gradient. It only operates to the right.
ShoulderParabolicDaylight
The ShoulderParabolicDaylight subassembly provides rounding at the Vertical Intersection Point (VIP) between the shoulder and daylight links as well as fillet rounding between the daylight link and target surface.
ShoulderRoundedTarget
The ShoulderRoundedTarget subassembly provides rounding of a shoulder.
ShoulderVariesExtensions
The ShoulderVariesExtensions subassembly has a base and subbase that extends past the rest of the pavement layers.
SideSlopeCutDitch
The SideSlopeCutDitch subassembly inserts links to create an optional ditch and then daylights to cut and fill.
FootpathSlopesAndBase
The FootpathSlopesAndBase subassembly creates links for a concrete footpath with inside and outside boulevards.
SimpleCutWithLanding
The SimpleCutWithLanding subassembly allows a simple landing / shoulder with a cut option. The subassembly only daylights in a cut situation.
SimpleTunnel
The SimpleTunnel subassembly is for a simple tunnel, or box culvert. It uses the height, width, and material thickness that you input.
SimpleTunnelOpenBottom
The SimpleTunnelOpenBottom subassembly is for a simple tunnel with open bottom. It uses the height, width, and material thickness that you input.
SLOCityCurbs
The SLOCityCurbs subassembly inserts links and shapes to create kerbs, channels and footpaths according to the City of San Luis Obispo Standard Plans.
SLOCountyKerbs
The SLOCountyKerbs subassembly inserts links and shapes to create kerbs, channels and footpaths according to the County of San Luis Obispo Standard Plan.
SlopeDitch
The SlopeDitch subassembly creates a ditch with backslope and foreslopes. In cut, it daylights to the existing ground. In fill, a benching is created and then daylights.
SoundWall
The SoundWall subassembly inserts links and shapes to create a sound wall based on Caltrans Standard Plan B15-1.
StructuralSteelPlateVehicularUndercrossing
The StructuralSteelPlateVehicularUndercrossing subassembly inserts links and shapes to create a Structural Steel Plate Vehicular Undercrossing based on Caltrans Standard Plan B15-1 and Contech Construction Products, Inc.
ValleyChannel
The ValleyChannel subassembly is a concrete arched valley channel. You can define width and curvature by selecting from predefined geometries.
ValleyChannelSimple
The ValleyChannelSimple subassembly is a concrete valley channel with user defined widths, concrete depths, and invert level depth. The width can be modified and the invert level stays at the center.
VegetatedFilterStrip
The VegetatedFilterStrip subassembly inserts links to create a vegetated filter strip to treat storm water.
VegetatedSwale
The VegetatedSwale subassembly creates a vegetated swale to treat storm water.